System Accessories

DAMS D6050 Series

PDF IconView x000 Series datasheet
Positioner Specifications
Frequency Ranges DC to 6 GHz (DAMS D6050-6)
DC to 18 GHz (DAMS D6050-18)
DC to 40 GHz (DAMS D6050-40)
DC-50 GHz(DAMS D6050-50)
Cable Interface Ultra high-quality cable with SMA connectors
Ultra-precision, low-noise rotary joint with SMA connectors
("K" connectors on DAMS D6040)
Platform Movement Horizontal 1.8º precision stepper motor with worm gear drive
Up to .02º Turntable (Elevation) resolution
Up to .025º Roll (Azimuth) resolution
360º azimuth range
± 180º elevation range
Weight Capacity 10 lbs. maximum @ level position (DAMS 5000)
20 lbs. maximum @ level position (DAMS 6000/7000)
(capacity decreases with angle)
Platform Control Interface USB 1.1 (RS232 available upon request)
Special Options
(included w/ DAMS 6000/7000)
Acrylic or aluminum thrust plate (additional cost may apply)
Digital level for precise setup
Ultra-high resolution option
Positioning laser for long range alignment
Vertical alignment tool
+/- 90 degree pivot for spherical measurements
DAMS Software Studio Pro
Advanced processing module
Up to 3-year warranty on parts and labor (all x000 systems)
Technical support (all x000 systems)
Analyzer Control Interface GPIB controller card (not included)
Platform Max Speed 120º per minute (vertical)
30 R.P.M. maximum azimuth
Positioner Mounting Velbon tripod with fluid pan head
Horizontal or vertical, standard 1/4-20 tripod threads
Positioner Composition 85% acrylic and Delrin® construction for limited reflection
Environmental Conditions Operating temp: 0° C to 45° C (32° F to 104° F)
No condensation
Transport temp: -40° C to 60° C (-40° F to 140° F)
10% to 90% relative humidity
No condensation within 72 hours
Power Requirements +24 vDC (3.0A) center pin + on connector
Positioner Dimensions 12 inches (30.5 cm) wide
5 inches (12.5 cm) tall WITHOUT vertical movement assembly
14 inches (35.6 cm) tall WITH vertical movement assembly
Positioner Weight 5 pounds (2.27 kg)
Width 12" (30.5 cm) without tripod
Height 5" (12.5 cm) without vertical movement assembly or tripod
35" (88.9 cm) minimum or 70" maximum (177.8 cm) with vertical movement assembly and tripod
Tripod Composition Aluminum and plastic